XTend 900 1W RPSMA 40 Miles Range XTEND XBEE Wireless Telemetry Module
Product Details:
Place of Origin: | CHINA |
---|---|
Brand Name: | LXXTECH |
Model Number: | LXX-0403 |
Certification: |
Payment & Shipping Terms:
Minimum Order Quantity: | ۱ |
---|---|
Price: | Good price |
Delivery Time: | |
Payment Terms: | TT ,paypal,ESCROW |
Supply Ability: |
Detailed Product Description
XTend 900 1W RPSMA 40 Miles Range XTEND XBEE Wireless Telemetry Module
Description:
– The XTend Modem packs a ton of RF punch into a small, low-power, easy-to-use, and reliable module. Outdoors, with line-of-sight, this module can communicate at up to 40 miles; indoors it can still do up to 3000ft. The module transfers a standard asynchronous serial data stream, operates within the ISM 900MHz frequency band and sustains up to 115.2kbps data throughput. The module comes with an attached RPSMA antenna connector.
– The XTend module utilizes FHSS (Frequency Hopping Spread Spectrum) agility to avoid interference by hopping to a new frequency on every packet transmission or re-transmission. Its transmit power is software adjustable from 1mW to 1W—the maximum output power allowable by governments that use 900MHz as a license-free band. The XTend module is approved for use in the United States, Canada, Australia and other countries (contact Digi for a complete listing).
– No configuration is necessary for out-of-the-box RF communication. The XTend module’s default configuration supports a wide range of data system applications. Advanced configurations can be implemented using simple AT or binary commands.
Features:
– Supply voltage: 2.8 – 5.5VDC regulated
– Frequency band: 902 – 928MHz
– Serial data interface: 3V – 5V CMOS UART – No configuration required
– Transmit current: 730 mA (@ 5V, 1W TX Power Output)
– Receive current: 80 mA (@ 5V, 1W TX Power Output)
– Indoor/Urban range (w/ 2.1 dB dipole antenna): Up to 3000 feet (900 m)
– Outdoor RF line-of-sight range (w/high gain antenna): Up to 40 miles (64 km)
– Transmit power output (software selectable): 1mW – 1W (0 – 30 dBm)
– Throughput data rate (software selectable): 9,600 or 115,200 bps
– RPSMA antenna connection
جهت راهنمایی با شماره ۰۹۱۲۰۸۵۵۵۳۰ تماس بگیرید.
XTAB – XTend to XStream adapter board
Here are some photos of the two XTend Adapter Boards-with and without Accessories-(p/n: XTAB and XTAB-A). The XTABs create an XStream footprint for the XTend OEM module. Following are some explanations of the part numbers.
Note: Digi no longer sells these adapter boards.
۱ – XTAB installed on XIB-R with JM2R6-CR3-7I antenna cable
۲ – Top of XTAB (back) and XTAB-A (front) |
۳ – Bottom of XTAB (left) and XTAB-A (right) |
۴ – XTAB-A installed on XIB-R |
۵ – Expanded view of XTAB-A installed on XIB-R |
- The XTAB has no RF connector. This board is generally used when the XTend XT09-MI module will be used with an antenna or RF cable with an MMCX RF connector.
If an RPSMA connector is required we offer a 7″ MMCX to RPSMA-female RF cable (p/n: JM2R6-CR3-7I). The MMCX connector can be plugged into the XTend module, and the bulk-head RPSMA-female connector (just like on the XStream OEM module) can mount at any location on the enclosure. - The XTAB-A comes with an RPSMA-female RF connector in the same place as on the XStream OEM module, plus an MMCX to MMCX RF connector cable to connect the XT09-MI to the XTAB-A. This can be used to make an XT09-MI module look just like an XStream OEM module (plus an additional < 0.100″ height), complete with RPSMA-female antenna connector in the same place.
Warning: The above photographs show the XTend module plugging into the XStream Interface Board (XIB-R). This is only functional if the transmit power of the XTend module is turned down to 100mW (ATPL=2). The XIB-R’s voltage regulator is limited to only 250mA source current, so it cannot support the XTend module at higher transmit power levels.
Note: Usage of XTAB and XTAB-A boards should not be considered a permanent solution. We are unsure how long they will be offered. Use them as a temporary solution while redesigning a PCB, prototyping with XTend modems, or testing.
Please do not hesitate to contact Technical Services with any questions you may have on these products.